![background image](http://html1.mh-extra.com/html/barco/dp2k-12c/dp2k-12c_installation-manual_3917263060.webp)
7. Communicator touch panel
A
Touch screen
B
Communication panel
C
Knob to operate central swivel clamp
D
Base of swivel arm
E
Power input 12 VDC, 1.5A
F
RS232 port (sub-D)
G
Ethernet port (RJ45)
C
AUTION
:
For more information about the use of the Communicator Touch Panel, consult its user guide.
7.2
Installing the touch panel interface
Necessary tools
•
17 mm wrench.
•
10 mm wrench.
How to install the touch panel interface upon the DP2K C-series projector?
1. Assemble the mounting plate and the swivel arm together as illustrated. First place the nut (N) upon the rod of the mounting
plate, then add the lock washer (L), then fasten the mounting plate and the swivel arm together. When the arm is mounted, turn
nut (N) against the arm to secure the position.
N
L
Image 7-3
Assemble swivel arm
2. Slide a washer (M) over the base of the swivel arm and Insert the base of the swivel arm into the mounting hole at the top of the
DP2K C-series projectoras illustrated.
M
Image 7-4
Mount swivel arm
54
R5905050 DP2K C-SERIES 10/07/2012
Summary of Contents for DP2K-12C
