![background image](http://html1.mh-extra.com/html/barco/dp2k-12c/dp2k-12c_installation-manual_3917263029.webp)
4. Lamp & Lamp House
Supported xenon bulb lamps (without lamp house)
Lamp
Type
Order info
DP2K-12C
DP2K-15C
DP2K-20C
Osram xenon lamp of 4 kW
4kW DHP
R9855937
-
-
X
Osram xenon lamp of 3 kW
3kW DHP
R9855938
-
X
X
Osram xenon lamp of 2 kW
2kW DHP
R9855956
X
X
X
Osram xenon lamp of 1.2kW
1200W DHP
R9855959
X
X
X
Ushio xenon lamp of 4 kW
DXL40BAF
R9855939
-
-
X
Ushio xenon lamp of 3 kW
DXL30BAF
R9855940
-
X
X
Ushio xenon lamp of 2 kW
DXL20BAF
R9855955
X
X
X
Ushio xenon lamp of 2 kW
DXL20BAF/2
R9855965
X
X
X
Ushio xenon lamp of 1.2kW
DXL12BAF
R9855961
X
X
X
Philips xenon lamp of 4 kW
XDC-4000B
R9856370
-
-
X
X = lamp is available for this projector.
- = lamp cannot be used in this projector.
4.2
Removal of the lamp house
W
ARNING
:
This procedure may only be performed by quali
fi
ed technical service personnel.
C
AUTION
:
Lamp casing is very hot after operation. To avoid burns, let the projector cool down for at least 15
minutes before proceeding to the lamp unit replacement.
C
AUTION
:
Due to its high internal pressure, the lamp may explode in either hot or cold states if improperly
handled.
Necessary tools
•
Flat screw driver or
•
Nut driver 8mm
How to remove the lamp house of the projector
1. Switch off the projector.
2. Remove the lamp cover.
3. Release the three spring lock screws of the lamp house as illustrated.
R5905050 DP2K C-SERIES 10/07/2012
23
Summary of Contents for DP2K-12C
