Barco DP K-32B Series, User And Installation Manual

Page: 37 / 190

R5905754 /13 DPxK-32B 37
Parts identification manual Lamp House
1
11
12
4 5 6
2
7
8
9
17
16
14
15
10
3
13
Image 4-3
1 Air inlet cathode cooling.
2 Adjustment screw horizontal lamp alignment.
3 Positioning pin.
4 Connection Lamp Info module.
5 Positioning pin.
6 UV blocker.
7 Cathode connection with SPG.
8 Anode connection with SPG.
9 Removable front cover.
10 Air out let.
11 Removable side cover.
12 Lamp Info module.
13 Lamp House fixation screw.
14 Adjustment screw horizontal lamp alignment.
15 Lamp cathode fixation screw.
16 Adjustment screw for lamp Z-alignment.
17 Adjustment screw vertical lamp alignment.
4.2 Supported xenon lamps for the XL Lamp House
Anode and cathode lamp adapters are used to position the arc of the xenon lamp in the middle of
the reflector inside the lamp house. The size of the xenon lamp vary from type to type. Because of
that different lamp adapters are required. Futhermore, some lamp types require an anode
adaptation bushing to fit precisely into the anode support assembly. The table below shows for each
supported xenon lamp which anode/cathode adapters have to be used and if an anode adaptation
bushing is required.
All lamps and adapters in the table below must be used with the XL Lamp House (either manual or
motorized). Note that the maximum lamp power the projector delivers depends on the type of
projector and the installed lamp. Prior to install the lamp it's important to check with the
Communicator software if the lamp is listed in the list of supported lamps for this projector.
Supported lamp types and their respective anode/cathode adapters for the XL Lamp
House:
Lamp type /
Supplier
Cathode adapter Anode adapter
Anode adaptation
bushing
Barco Order No.
3000W DHS OFR
OSRAM XBO R8436061K R859987K - R9855950
4500W DHP-OFR
OSRAM XBO R8436081K (R859986K)* - R9855949
6000W DHP-OFR
OSRAM XBO R8436081K - (R864132K)* R98064901
6500W DHP-OFR
OSRAM XBO R8436081K - (R864132K)* R9806860
Lamp & Lamp House