![background image](http://html1.mh-extra.com/html/barco/dp-1200/dp-1200_installation-manual_473995046.webp)
4. Lamp & Lamp House
4.6
Resetting the lamp parameters
C
AUTION
:
The “LAMP INFO” parameters which are stored on a chip MUST be updated after each installation
of an xenon bulb lamp inside the lamp house. Neglecting this update will result in poor performance and short
life time of the xenon bulb lamp.
How to reset the lamp parameters?
1. Start up the projector but do not ignite the lamp.
2. Go via the
Communicator
touch panel to the menu “
Installation
” > “
Lamp
” > “
Lamp information
”.
3. While the
Lamp information
window is displayed, tip on
Reset
(1).
A reset message is displayed (2).
4. Fill out the article number of the new lamp (3a)
Or,
click on
Select
(3b) to display a list of possible article numbers (4). Select a article number (5) and click
OK
(6).
The software will check if the entered article number is a valid number (7).
5. Fill out the serial number of the lamp (8).
6. Click
Reset
(9).
Image 4-22
Reset lamp info
C
AUTION
:
For more information about using the Communicator touch panel consult the user’s guide of the
communicator touch panel.
42
R59770242 DP-1200 06/01/2009
Summary of Contents for DP-1200
