Barco DML-1200, User Manual

Page: 54 / 113

9. Service menu
How to consult
1. Press Enter to start up the main menu.
2. Turn the jog dial to select Service and press Enter .
3. Turn the jog dial to select Identi fi cation and press Enter
The device typical items are displayed.
Image 9-1
Image 9-2
Image 9-3
9.3 Diagnosis
9.3.1 Version table
What can be displayed ?
The software version of the different components inside the device can be displayed. As the list is too long to be displayed on single
LCD display, when reaching the last item in the
fi rst page turn the jog dial further in the same direction and the second page is
automatically displayed on the LCD display.
The following items are given in the list:
•
Main software
• Fan controller software
• Lamp info units
• FPGA
• CPLD
• Video FPGA
• Fiberlink TX and RX
How to display an overview
1. Press Enter to start up the main menu.
2. Turn the jog dial to select Service and press Enter .
3. Turn the jog dial to select Diagnosis and press Enter .
4. Turn the jog dial to select Version table and press Enter .
The fi rst page of the version table is displayed. As there are more items than space available on the LCD, when turning the jog
dial further than the last item a new page will be displayed.
Image 9-4
Image 9-5
Image 9-6
50 R59770208 DML-1200 06/11/2009