Barco DML-1200, User Manual

Page: 40 / 113

7. Lamp menu
How to display
1. Press Enter to start up the main menu.
2. Turn the jog dial to select Lamp and press Enter .
3. Turn the jog dial to select Identi fi cation . and press Enter .
The identi fi cation data of the fi rst lamp is displayed.
Turn the jog dial to display the identi fi cation screen of another lamp.
Image 7-1
Image 7-2
Image 7-3
7.3 Status and run time overview lamps
Overview
1. Press Enter to start up the main menu.
2. Turn the jog dial to select Lamp and press Enter .
3. Turn the jog dial to select Overview and press Enter .
The lamp overview menu appears.
The status and the run time for each lamp is indicated.
Image 7-4
Image 7-5
Image 7-6
About run time warnings and errors
When at least one lamp reaches 1500 hours, an warning is displayed on the local LCD to indicate the replacement of this lamp.
When all 4 lamps are running for more than 2000 hours, device will not start up anymore. Replacing all lamps is immediately
necessary.
7.4 High altitude mode
What can be done ?
When using the device on a high altitude (less air density) enabling the high altitude mode will run the fans faster so that the cooling
is guaranteed This mode can also be used when increased cooling is required. The speed of the cooling fans will be increased.
Switching to high altitude mode will increase the noise level of the device.
36 R59770208 DML-1200 06/11/2009