94
DCS-200 • User’s Guide
4. Operation
Using Black
_ä~Åâ=^ìíç=q~âÉ=lå=
When the “
Black Auto Take
” function is
ON
in the
User Preference Menu
, you
do not
need to press
TAKE
to perform a transition to/from black. The transition occurs
immediately, once
BLACK
is pressed.
Use the following steps to transition to/from black, when
Black Auto Take
is
ON
:
1.
Press
BLACK
. The system immediately transitions to/from black, at the current
transition rate.
Please note:
~
If the transition is “
to
” black, the
BLACK
button blinks fast during the
transition interval, then lights solid when black is on Program.
~
If the transition is “
from
” black, the
BLACK
button blinks fast during the
transition interval, then automatically turns off when the selected source
is fully on Program.
Important
When the
Black Auto Take
function
is
ON
, if a different
source is pending when
TAKE
is pressed, that source
remains pending
(blinking)
after
black is fully reached. The
system does not transition to the pending source, and
sources do not flip-flop. If desired, you can transition to the
pending source
underneath
black, by pressing
TAKE
in the
normal manner, and then pressing
BLACK
to immediately
fade up to the new source.
