![background image](http://html1.mh-extra.com/html/barco/cx-50-gen2/cx-50-gen2_installation-manual_3868346042.webp)
R5900120 /01
CX-50 Gen2
42
What happens if you select the wrong audio device
•
When you are sharing screen content and the audio goes through the speakerphone
-
Audio will be played out in the room even when not sharing
-
Audio will be transmitted low-latency, so there will be no lip-sync
-
Due to aggressive jitter adaptation, the sound (esp. music) might not be 100% fixed tone
•
When you use the ClickShare speaker in your UC&C call
-
Audio will have additional delay
-
Audio will not be outputted when you are not on screen, potentially giving you a false feeling of “ended
call” or “muted state”
•
When you do not select the room speakerphone as microphone, but your laptop’s microphone in
combination with a ClickShare Speaker or the room speakerphone:
-
High probability of echo for remote participants!
-
Bad microphone pickup in the room
4.16 LAN connection
About LAN connection
The Base Unit can be connected to a local network or directly to a laptop.
Maximum allowed LAN speed: 1000 Mbit
We do strongly advise the LAN connection and the use of XMS cloud for configuration, monitoring and
additional functionality. The LAN connection also greatly improves the user experience when using the
ClickShare Apps and native sharing protocols such as Airplay and others.
How to connect
1.
Insert a network cable with RJ-45 connector into the LAN port.
2.
Connect the other side to a LAN.
4.17 HDMI connection to the Base Unit
About HDMI in
By default there is no HDMI in to the Base Unit. To connect HDMI to the Base Unit a Barco adapter must be
used. This adapter makes it possible to connect an HDMI source to the Base Unit and a USB Type-C
TM
port
remains available. The connected HDMI signal will be converted to DipslayPort over USB-C.
DisplayPort over USB-C needs bo be enabled in the
Configurator
, tab page
Display & Audio
,
Inputs
.
Required parts
Barco HDMI-in to USB-C convertor kit (R9861581)
How to connect
1.
Connect the USB Type-C
TM
connector of the HDMI adapter with the front USB Type-C
TM
port (1).
Summary of Contents for CX-50 Gen2
