Barco CX-20, Installation Manual

Page: 90 / 102

R5900102 /02 CX-20 90
2. Click System → Buttons .
Image 6 – 37 Buttons overview
The current state is indicated and the list of Buttons is given.
3. Click Edit settings .
4. Select to which access point the Buttons are connected. Click on the drop down list next to Buttons
connect to and select the desired point.
Depending on the selection, internal access point or external access point, settings should be filed out.
For an internal access point, no settings are needed.
6.25 XMS Cloud Integration
Overview
When your device is not registered and connected to the cloud service, the following message will be
displayed:
The ClickShare device is unable to connect to the cloud service . Make sure the network settings
are correctly configured .
When your device is correctly registered, the following message is displayed: The ClickShare device has been
successfully registered ;
CX-20 Configurator