Barco Coronis Uniti, User Manual

Page: 16 / 70

K5902079 /11 Coronis Uniti 16
2.4 MXRT driver and Intuitive Workflow Tools
installation
About
When you are using a Barco MXRT display controller, you can start up your Coronis Uniti display system and
install the
MXRT driver and Intuitive Workflow Tools . Barco’s Intuitive Workflow Tools are designed to
increase visibility of subtle details, improve focus during reading sessions, and accelerate workflow.
To install the MXRT driver and Intuitive Workflow Tools
1. Switch on your Coronis Uniti as described in “Standby switching”, page 23 .
2. Turn on the workstation connected to your display.
Your display will be running in a basic video mode at a default refresh rate when first time starting up.
3. Download the latest MXRT driver and Intuitive Workflow Tools from www.barco.com/mxrt.
4. Install the MXRT driver and Barco’s Intuitive Workflow Tools as described in the Barco “Display
Controller and Intuitive Workflow Tools” user guide on the included documentation CD, or at www.barco.
com/support .
5. When the drivers are completely installed, your display will automatically detect the connected video input
signal(s) and apply the correct video mode and refresh rate.
2.5 QAWeb registration
About
QAWeb Enterprise helps you manage quality and assure compliance of your expanding healthcare
enterprise with less effort, lower cost, and complete confidence. This fully automated and secure system
guarantees a consistent image quality and uptime for all registered imaging display systems within your facility
and across your enterprise. Learn more at
www.barco.com/qaweb .
To register your display system to your QAWeb Enterprise organization, the QAWeb Enterprise Agent must be
installed and running on your workstation and it must be able to communicate with the QAWeb Enterprise
cloud service.
For more information and instructions, check the QAWeb Enterprise user guide on www.barco.com/support/
qaweb-enterprise .
When still using the older MediCal QAWeb, visit www.barco.com/support/medical-qaweb to obtain
the installation package and user documentation.
2.6 Mounting the film clip
To mount the film clip
The film clip can be mounted on the top side of the display.
1. Position the film clip on the top side of the bezel at the desired location (in the middle, left or right).
Installation and setup