![background image](http://html1.mh-extra.com/html/barco/coronis-fusion-10mp/coronis-fusion-10mp_user-manual_3897542038.webp)
38
Coronis Fusion 10MP
Video input signals
A
BOUT
VIDEO
INPUT
SIGNALS
The available input signals for your display are:
T
O
MANUALLY
SELECT
A
VIDEO
INPUT
SIGNAL
:
1
Bring up the OSD main menu.
2
Navigate to the
Configuration
>
Image Sources > (Left/Right)
Image Source
menu.
3
Enter the
Input Signal
submenu.
4
Select one of the available input signals and confirm.
Your C
ORONIS
F
USION
10MP display automatically detects the
connected video input signals. Manually selecting image
source video input signals is possible, but then your display’s
image source selection mode should be set to allow this.
Please refer to
“Image source selection modes”
to do this.
DisplayPort 1
This input corresponds to the DisplayPort 1
connector as shown in the
section.
DVI 1
This input corresponds to the DVI 1
connector as shown in the
section.
DisplayPort 2
This input corresponds to the DisplayPort 2
connector as shown in the
section.
DVI 2
This input corresponds to the DVI 2
connector as shown in the
section.
Summary of Contents for Coronis Fusion 10MP
