![background image](http://html1.mh-extra.com/html/barco/coronis-fusion-10mp/coronis-fusion-10mp_user-manual_3897542030.webp)
30
Coronis Fusion 10MP
Keys sound
A
BOUT
THE
KEYS
SOUND
By default, the keys will make a “beep” sound on every touch. However,
this sound can be disabled so that no sound will be heard when using
the keys.
T
O
ENABLE
/
DISABLE
THE
KEYS
SOUND
:
1
Bring up the OSD main menu.
2
Navigate to the
Configuration
>
User Interface
>
Controls
menu.
3
Enter the
Sound
submenu.
4
Select
Enabled/Disabled
as desired and confirm.
DPMS mode
A
BOUT
DPMS
MODE
Enabling the Display Power Management System (DPMS) mode on your
display will optimize its diagnostic lifetime by automatically switching
off the backlight when the display is not used for a specified period of
time. By default, DPMS mode is enabled on your display, but it also
needs to be activated on your workstation. To do this, go to the “Power
options properties” window of your workstation.
T
O
ENABLE
/
DISABLE
DPMS
MODE
ON
YOUR
DISPLAY
:
1
Bring up the OSD main menu.
2
Navigate to the
Configuration
>
Power Management
menu.
3
Enter the
DPMS Mode
submenu.
4
Select
Enabled/Disabled
as desired and confirm.
Barco recommends setting DPMS activation after 20 minutes of
non-usage.
Summary of Contents for Coronis Fusion 10MP
