Barco CLM HD8 User Manual Download Page 55

Page: 55 / 231

6. Getting started

When no digit is pressed after Rigging is pressed, the layout selection menu disappears after a few seconds
without a layout change.

6.5.5

Quick language selection

Language selection

1. Press

Menu

to activate the menus and select with the

▲

▼

key Projector Control and press

ENTER

2. Select with the

▲

▼

key Language and press

ENTER

The language menu opens.

3. Select with the

▲

▼

key the desired language and press

ENTER

to activate.

The current active language is indicated with an asterisk (*).

Image 6-12

Image 6-13

Image 6-14

6.6

Use of the AUTO button

What is possible?

The AUTO button can be con

gured as an auto align of the projected source or as an auto image button which calls a choice menu.

Within this choice menu, the user can execute an auto align of the image, an auto contrast/brightness and an auto phase.

To use this button, just press Auto on the remote control or the local key path.

When the button is con

gured as align only, the projected image will be aligned.

When the button is con

gured as auto image, the auto image menu will be displayed.

Image 6-15

Use the

▲

▼

key to select the desired function and press

ENTER

to activate.

6.7

Projector Address

6.7.1

Displaying and Programming addresses

Displaying the Projector Address on the Screen.

1. Press

Address

key (recessed key on the RCU) with a pencil.

R59770057 CLM HD8 15/03/2010

Summary of Contents for CLM HD8








































































































































































































































Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands

Barco CLM HD8, User Manual

Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands