Barco CLM HD8 User Manual Download Page 218

Page: 218 / 231

F. Mounting optional Carry handle

1
2
3

Image F-5

3. Insert next to the removed back foot the extra support point (reference 1). Use a 22mm open-end wrench to fasten the extra

support.

Due to its construction, the support is still a bit movable.

Image F-6

F.4

Mounting the carry handle

Necessary tools

•

8 mm Allen wrench.

•

4 mm Allen wrench.

•

2,5 mm Allen wrench.

Necessary parts

•

One spacer rotation ring.

•

One

at spacer.

•

One hexagon socket head cap screws M10 x 20.

•

Three hexagon socket head cap screws M10 x 40.

•

Four hexagon socket head cap screws M5 x 10.

How to mount the carry handle?

1. Place the carry handle upon the bottom of the projector as illustrated.

2. Insert the spacer rotation ring (reference 4) and a hexagon socket head cap screw M10 x 40 (reference 1) in the back

xation

hole so that a small rotation of the carry handle is still possible.

3. Insert a

at spacer (reference 3) and a hexagon socket head cap screw M10 x 20 (reference 2) in the

xation hole of the extra

support point.

4. Insert a hexagon socket head cap screw (reference 1) into both

xation holes at the front of the carry handle.

Note:

If both front holes are not completely free, turn on the skew adjustment (reference 5) at the right side of the carry handle
until the holes are free.

214

R59770057 CLM HD8 15/03/2010

Summary of Contents for CLM HD8








































































































































































































































Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands

Barco CLM HD8, User Manual

Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands