Barco CLM HD8 User Manual Download Page 217

Page: 217 / 231

F. Mounting optional Carry handle

Image F-4
Remove stacking point construction

F.3

Preparing the projector

AUTION

Before turning the projector upside down, be sure the stacking points on the top cover are

mounted.

What has to be done?

Before the carry handle can be mounted, the projector feet must be removed and an extra support point must be added.

Necessary tools

•

8 mm Allen wrench.

•

22 mm open-end wrench.

Necessary parts

Back support point.

How to handle?

1. Turn the projector upside down.

2. Remove the 3 feet. First unscrew the foot cap (reference 1) and than loosen the foot adapters (reference 3). Use a 4 mm Allen

wrench to unscrew the hexagon socket head cap screws (reference 2).

R59770057 CLM HD8 15/03/2010

213

Summary of Contents for CLM HD8








































































































































































































































Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands

Barco CLM HD8, User Manual

Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands