Barco CLM HD8 User Manual Download Page 188

Page: 188 / 231

17. Projector covers, removal and installation

Image 17-6
Remove back cover

17.4 Removal of the top cover

To remove the top cover,

rst remove the front and back cover and the lamp door.

Necessary tools

Flat screwdriver

How to remove the top cover

1. Release the captive screw in the middle of the top cover.

Image 17-7
Remove top cover

2. Pull the cover out of its locks and take it off.

17.5 Removal of the side cover

To remove the side cover,

rst remove the front, back and top cover.

Necessary tools

Flat screwdriver

How to remove the side cover

1. Loosen both screws.

184

R59770057 CLM HD8 15/03/2010

Summary of Contents for CLM HD8








































































































































































































































Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands

Barco CLM HD8, User Manual

Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands