Barco CLM HD8 User Manual Download Page 176

Page: 176 / 231

16. Servicing

Image 16-3
Mounting the lens

4. Insert the lens in such a way that the female jack (C) is in front of the male jack (upper left corner) (B) and ensure the lens touches

the front plate of the lens holder.

Caution:

Do not release the lens yet, as the lens may fall out of the lens holder.

5. Secure the lens in the lens holder by sliding the lens lock handle A into the “locked” position (left position for table mounted

projector).

6. Check if the lens is really secured by trying to pull the lens out of the lens holder.

AUTION

Never transport the projector with a Lens mounted in the Lens Holder. Always remove the Lens

before transporting the projector. Neglecting this can damage the Lens Holder and Prism.

16.4 Lens removal

How to remove the lens

1. Remove the front cover of the projector. See "Removal of the front cover", page 181.

2. Support the lens with one hand and push the lens lock handle to the right.

Image 16-4
Lens removal

3. Pull out the lens backward until the jack connection is open (A). Slide the lens out of the lens holder.

172

R59770057 CLM HD8 15/03/2010

Summary of Contents for CLM HD8








































































































































































































































Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands

Barco CLM HD8, User Manual

Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands