Barco CLM HD8 User Manual Download Page 174

Page: 174 / 231

16. Servicing

Image 16-1
Filter top replacement

4. Insert a new HEPA

lter

rst with the side next to the lamp housing and pull down the other side to lock the

lter.

5. Reinstall the lamp door, see "Installation of the lamp door", page 188.

AUTION

Never install a used HEPA

lter. Always install a new HEPA

lter.

AUTION

Never use the projector with a removed cover. Always reinstall the removed cover.

16.2 Replacement of the dust

lters on the front side

Necessary parts

Two new HEPA dust

lters.

How to replace the

lters on the front side of the projector

1. Switch off the projector and unplug the power cord from the wall outlet.

2. Remove the front cover, see "Removal of the front cover", page 181.

3. Remove the HEPA

lter on the front side by pulling the spring clamp (A) on the upper side away from the

lter and then pivot the

lter a little ( B) and take it out (C).

170

R59770057 CLM HD8 15/03/2010

Summary of Contents for CLM HD8








































































































































































































































Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands

Barco CLM HD8, User Manual

Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands