Barco CLM HD8 User Manual Download Page 13

Page: 13 / 231

1. Safety

1.4

Important warnings concerning CLM

ight cases

Important warnings concerning stacking/transporting CLM rental

ight cases

•

Stack maximum two (2) CLM rental

ight cases high. Never higher.

•

Surface on which

ight case is standing must be level to ensure that the total load is evenly spread out among the four wheels.

The surface must also be able to support the load safely.

•

Before stacking or transporting

ight cases, check the wheels and their

xation screws for wear or defects.

•

Before stacking or transporting

ight cases, check that the four lock handles on each

ight case are in good working order and

locked securely.

•

When stacked, make sure the wheels of the upper

ight case are precisely positioned in the stacking dishes of the

ight case

below.

•

Stacked

ight cases may not be moved. Before stacking, the lower

ight case must already be in its

nal resting position before

placing the second upon it.

•

Never stack loaded

ight cases in a truck or other transport medium, unless each

ight case is rigidly strapped tight.

•

In the event of a wheel breaking,

ight cases must be rigidly strapped tight to prevent a stack collapsing.

•

Use an appropriate forklift to raise

ight cases and take the necessary precautions to avoid personnel injury.

R59770057 CLM HD8 15/03/2010

Summary of Contents for CLM HD8








































































































































































































































Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands

Barco CLM HD8, User Manual

Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands