Barco CLM HD8 User Manual Download Page 122

Page: 122 / 231

12. Alignment menu

Image 12-9

Image 12-10

2. Use the

▲

▼

key to shift the lens upwards or downwards.

Use the

◄

►

key to shift the lens to the left or to the right.

12.4 Side keystone

What can be done?

The side keystone adjustment is used to align the image if the projector is mounted at a non standard projection angle.

Image 12-11
Side keystone

Keystone adjustment with positive values

Keystone adjustment with negative values

Side keystone adjustment

1. Press

MENU

to activate the menus.

2. Use the

▲

▼

key to select

Alignment

and press

ENTER

3. Use the

▲

▼

key to select

Side keystone

and press

ENTER

The keystone dialog box appears.

4. Use the

◄

►

key to adjust the keystone of the image.

When the upper part of the image is wider than the lower part of the image, push the

◄

key. The value below the bar scale will

be negative.

When the upper part of the image is smaller than the lower part of the image, push the

►

key. The value below the bar scale

will be positive.

Image 12-12

Image 12-13

Image 12-14

118

R59770057 CLM HD8 15/03/2010

Summary of Contents for CLM HD8








































































































































































































































Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands

Barco CLM HD8, User Manual

Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands