Barco CLM HD8 User Manual Download Page 103

Page: 103 / 231

10. Layout menu

Image 10-16

[ ] = no lock between height and width.

[x] = width and height are locked.

6. Use the

▲

▼

key to adjust the height.

Use the

◄

►

key to adjust the width.

When the desired size is reached, press

EXIT

A Save window opens.

Image 10-17

7. Select with the

▲

▼

key

Yes

and press

ENTER

Select with the

▲

▼

key

, when no save is desired and press

ENTER

10.2.3 Position adjustment

What can be done?

The main window can be repositioned on the screen. The upper left corner is the reference.

Image 10-18
Positioning the window

How to position?

1. Press

MENU

to activate the menus.

2. Use the

▲

▼

key to select

Layout

and press

ENTER

3. Use the

▲

▼

key to select

Main Window

and press

ENTER

The main window opens.

4. Use the

▲

▼

key to select

Position

and press

ENTER

The position adjustment window opens.

5. Use the

▲

▼

key to adjust top start point.

R59770057 CLM HD8 15/03/2010

Summary of Contents for CLM HD8








































































































































































































































Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands

Barco CLM HD8, User Manual

Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands