Barco CLM HD8 R9050130, User Manual

Page: 87 / 197

9. Image menu
The manual load window opens.
Image 9-76
Image 9-77
Image 9-78
Image 9-79
Depending on the filter setup, the following is displayed:
- Fit: only fitting files for the selected source will be in the list
- All: all files in the system will be in the list.
5. Do you want to see only the fitting file in the manual load menu?
If yes, Select
Filter
and use ► till [FIT] is on the menu.
If no, Select
Filter
and use ► till [ALL] is on the menu.
6. Use the ▲ or ▼ key to select the appropriate file.
7. Press ENTER to select.
The selected file is loaded.
The image is not perfect?
If the displayed image is not correct after selecting the best fitting file, go to the
Timings
menu and change the file settings.
9.6.3 Delete file
How to delete?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select
Image
and press ENTER .
3. Use the ▲ or ▼ key to select
File services
and press ENTER .
The File service menu is displayed.
4. Use the ▲ or ▼ key to select
Delete
and press ENTER .
The delete window opens.
5. Use the ▲ or ▼ key to select the file which must be deleted.
Note: Only custom files can be deleted.
6. Press ENTER to delete the selected file.
R59770057 CLM HD8 16/07/2007 83