Barco CLM HD8 R9050130 User Manual Download Page 167

Page: 167 / 197

17. Projector covers, removal and installation

Image 17-4
Remove lamp door

17.3 Installation of the front cover

Front cover can only be installed after that the side covers and top cover are installed.

Necessary tools

Flat screwdriver

How to install the front cover

1. Insert the top of the front cover behind the front of the top cover (slant the cover a little bit before inserting (A) ).

Image 17-5
Install front cover

2. Pull the bottom side of the front cover toward the projector (B).

The sides of the front cover overlap the sides of the side covers.

3. Fasten the captive screw at the middle bottom of the front cover (C).

R59770057 CLM HD8 16/07/2007

163

Summary of Contents for CLM HD8 R9050130






































































































































































































Search results

Summary of Contents for CLM HD8 R9050130

Reviews:

Brands by name

Popular brands

Barco CLM HD8 R9050130, User Manual

Search results

Summary of Contents for CLM HD8 R9050130

Reviews:

Brands by name

Popular brands