Barco CLM HD8 R9050130, User Manual

Page: 110 / 197

11. Lamp menu
3. Use the ▲ or ▼ key to select
Overview
and press ENTER .
The status and the run time for each lamp are displayed.
Image 11-11
Image 11-12
Image 11-13
11.6 Lamp mode
What can be done?
The projector is equipped with 4 identical lamps. Depending on the main voltage, the lamp selection mode menu will show 4 lamps,
3 lamps, 2 lamps or a single lamp when starting up the projector.
When the main input voltage is between:
•
90-140V : lamp mode selection between 3 lamps, 2 lamps and 1 lamp.
• 170-264V : lamp mode selection between 4 lamps, 2 lamps and 1 lamp.
In 3 lamps mode, the projector will always ignite lamp 3 and 4 and lamp 1 or 2 depending on the run time of lamp 1 or 2. It will
always use those with the lowest run time.
In
2 lamps
mode, the projector will always ignite lamp 1 & 3 or 2 & 4 depending on the current run time. It will always use those with
the lowest run time.
In
1 lamp
mode, the projector will always ignite lamp 3 or 4, depending on the current run time. It will always use the lamp with the
lowest run time.
How to change the lamp mode
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select
Lamp
and press ENTER .
3. Use the ▲ or ▼ key to select
Lamp mode
and press ENTER .
The Lamp mode selection menu is displayed.
4. Use the ▲ or ▼ key to select the desired lamp mode and press ENTER .
Image 11-14
Image 11-15 Image 11-16
106 R59770057 CLM HD8 16/07/2007