Barco ClickShare CSE-200, Installation Manual

Page: 62 / 85

6. CSE-200 Configurator
How to start up for WPA2-PSK
1. Log in to the Con fi gurator .
2. Click WiFi & Network → Network integration . Click on Change con fi guraton .
3. Select the radio button next to WPA2-PSK and click Next .
Image 6-30
Network integration, WPA2-PSK selected
The WPA2-PSK mode window opens.
Necessary Data to continue:
Image 6-31
Corporate SSID The SSID of your corporate wireless infrastructure to which the ClickShare Buttons will connect.
Passphrase
(Pre-shared key) The key used in WPA2-PSK to authenticate onto the wireless infrastructure. This can be a string of
64 hexadecimal digits or a passphrase of 8 to 63 printable ASCII characters.
Click Next to continue.
When having problems connecting the Button to your corporate network, to get feedback from the Button please have a look at
the ClickShare Client log. This log can be pressing the holding Shift key when starting the Client executable. Look for the lines
“EDSUSBDongleConnection::mpParseDongleMessages” . An error code and a short summary of the issue should be logged.
6.17 Services, mobile devices
ClickShare app
This function enables the possibility to connect with a mobile device using the ClickShare app to connect to the Base Unit.
It is enabled by default. When the Base Unit is integrated in the corporate network, it may be required to disable content sharing
from the ClickShar app.
About streaming information via AirPlay
Before you can stream information and display it via ClickShare your device must be connected with the wireless network of the
Base Unit. Then AirPlay must be activated on your device. For more information about activating AirPlay, consult the user guide of
your device.
50 R5900023 CLICKSHARE CSE-200 13/07/2016