Barco ClickShare CSE-200+ Installation Manual Download Page 94

Page: 94 / 112

R5900087 /04

ClickShare CSE-200+

Image 6-53: Buttons, External access point, mode EAP-TTLS

The SSID of your corporate wireless infrastructure to which the ClickShare Buttons will connect.

Fill out the

Domain

and

Identity

Enter a

Password

Upload CA certificate. Click on Choose file and browse to the desired file.

The following formats are allowed:

•

.pem

•

.cer

•

.crt

•

.pb7 (Base64 encoded DER)

File should at least contain the root CA certificate for your domain.

Click

Save Changes

to save the settings.

6.37 Buttons, External access point, mode PEAP

How to fill out the settings

Fill out a

Corporate SSID

CSE-200+ Configurator

Summary of Contents for ClickShare CSE-200+

















































































































Search results

Summary of Contents for ClickShare CSE-200+

Reviews:

Related manuals for ClickShare CSE-200+

Brands by name

Popular brands

Barco ClickShare CSE-200+, Installation Manual

Search results

Summary of Contents for ClickShare CSE-200+

Reviews:

Related manuals for ClickShare CSE-200+

Brands by name

Popular brands