R5900087 /04
ClickShare CSE-200+
81
6.24 Services, SNMP
About SNMP
Simple Network Management Protocol (SNMP) is an internet standard protocol for collecting and organizing
information about managed devices on IP networks and for modifying that information to change device
behaviour. In general a SNMP management suite (running on a server) communicates with an SNMP agent
(running on the device). The SNMP agent collects and exposes device information in the form of variables
according a MIB (Management Information Base). SNMP management suites will be able to approach
ClickShare devices via SNMP protocol for requesting device information.
SNMPv3 is supported.
How to enable
1.
Log in to the
Configurator
.
2.
Click
WiFi & Network
→
Services
.
3.
Scroll to
SNMP
.
Image 6-36: Service, SNMP
4.
Check the check box in front of
Enable
.
The configuration fields become available.
How to configure
1.
When using the default
Engine ID
, make sure the check box before
Use default Engine ID
is checked.
The default engine ID is a combination of the Barco Enterprise Number with the MAC-address (eth0).
2.
Fill out the
SNMP Manager
address.
That is the host address which will receive the TRAP events/messages.
Possible traps can be:
•
Alarm CPU temperature trap which indicates that CPU temperature exceeds the threshold.
•
Alarm Case Fan Speed trap which indicates the case fan is spinning too slow.
•
Alarm Process Not Running trap which indicates one of the monitored processes is not running.
3.
Enter the
Username
.
4.
Enter a new password and confirm that password.
Summary of Contents for ClickShare CSE-200+
