Barco ClickShare CSE-200+, Installation Manual

Page: 67 / 112

R5900087 /04 ClickShare CSE-200+ 67
Image 6-21: WiFi Settings, Operational mode, Wireless Client
Different Wireless Client mode settings are possible:
• EAP-TLS
• EAP-TTLS
• PEAP
• WPA2 – PSK
6.13 WiFi settings, Wireless Client, EAP-TLS
About EAP-TLS
EAP-TLS (Transport Layer Security) is an EAP method based on certificates which allows mutual
authentication between client and server. It requires a PKI (Public Key Infrastructure) to distribute server and
client certificates. For some organizations this might be too big of a hurdle, for those cases EAP-TTLS and
PEAP provide good alternatives. Even though a X.509 client certificate is not strictly required by the standard
it is mandatory in most implementations including for ClickShare. When implemented using client certificates,
EAP-TLS is considered one of the most secure EAP methods. The only minor disadvantage, compared to
PEAP and EAP-TTLS, is that the user identity is transmitted in the clear before the actual TLS handshake is
performed. EAP-TLS is supported via SCEP or manual certificate upload.
How to start up for EAP-TLS
1. Log in to the Configurator .
2. Click Wi-Fi & Network → WiFi Settings .
3. When the Operational Mode is Wireless Client , select Authentication Mode . Click on the drop down list and
select EAP-TLS .
CSE-200+ Configurator