![background image](http://html1.mh-extra.com/html/barco/clickshare-cse-200/clickshare-cse-200_installation-manual_3896374047.webp)
R5900087 /04
ClickShare CSE-200+
47
6.1 Accessing the Configurator
Getting access to the Configurator
There are three ways to access the Configurator:
•
Via the LAN
•
Direct Ethernet connection between PC and Base Unit.
•
Via the Base Unit's wireless network
When accessing the configurator for the first time, the ClickShare Configuration Wizard starts automatically.
This configuration wizard can be started at any moment to change your configuration instead of using the
menus.
To access the Configurator via the LAN
1.
Open a browser.
Note:
Supported browsers are Internet Explorer, Firefox, Google Chrome and Safari.
2.
Browse to the IP address you can find in the bottom left corner of the startup screen.
Note:
The Wired IP address is only visible when the Base Unit is connected to the LAN.
A login screen appears.
Image 6-1: Login screen
3.
To change the language of the Configurator, click on the drop down next to the current selected language and
select the desired language.
Summary of Contents for ClickShare CSE-200+
