![background image](http://html1.mh-extra.com/html/barco/clickshare-cs-100/clickshare-cs-100_installation-manual_473945091.webp)
91
R5900022 /18
ClickShare CS-100 series
Image 6–46 Buttons, External access point, mode EAP-TTLS
The SSID of your corporate wireless infrastructure to which the ClickShare Buttons will connect.
2.
Fill out the
Domain
and
Identity
.
3.
Enter a
Password
.
4.
Upload CA certificate. Click on Choose file and browse to the desired file.
The following formats are allowed:
•
.pem
•
.cer
•
.crt
•
.pb7 (Base64 encoded DER)
File should at least contain the root CA certificate for your domain.
5.
Click
Save Changes
to save the settings.
6.31 Buttons, External access point, mode PEAP
How to fill out the settings
1.
Fill out a
Corporate SSID
.
Summary of Contents for ClickShare CS-100
