![background image](http://html1.mh-extra.com/html/barco/clickshare-cs-100/clickshare-cs-100_installation-manual_473945077.webp)
77
R5900022 /18
ClickShare CS-100 series
Image 6–26 Services, mobile devices
3.
To allow sharing content via ClickShare app, check the check box in front of
Sharing via ClickShare app
.
4.
To add a passcode, click on the drop down and select the desired passcode.
The following options are possible:
•
No passcode
•
Numeric passcode
5.
Click
Save changes
to apply this setting.
Access via the ClickShare app is activate.
6.16 Service, ClickShare API, remote control via
API
About API settings
The API can be enabled or disabled, that means that the access to the unit from an external device can be
allowed or can be blocked.
This functions in enabled by default.
How to enable
1.
Log in to the
Configurator
.
2.
Click
Wi-Fi & Network
→
Services
.
Image 6–27 ClickShare API setting
3.
Check the check box in front of
Remote control via API
to enable this function.
Checked: remote control via API is allowed. A password can be used to protect the access.
Summary of Contents for ClickShare CS-100
