![background image](http://html1.mh-extra.com/html/barco/cineversum-120/cineversum-120_owners-manual_4007649026.webp)
5. Direct source selection
5.2 Return to standby mode
How to return to standby remotely
1. Point the Remote Control to the front of the Cine VERSUM Master or the Cine VERSUM 120.
2. Press the standby button on the Remote Control again. (image 5-2)
The Cine VERSUM Master switches to the standby mode and switches on its turn the connected display into the standby mode.
When switching the Cine VERSUM 120 into the standby mode, a cool down period for the lamp of about 1
minute is activated. As a result, restarting of the lamp is not possible during the cool down period. This mode
(starting up during cool down period) is indicated by the standby LED which blinks at a beat of 0.3 on/0.3 off
22
R5976667 CINEVERSUM SYSTEM 01102003
Summary of Contents for CineVersum 120
