Barco CINE7 R9010040, Owner'S Manual

Page: 21 / 115

3. Source Connections
Image 3-9
3.6 Connecting a Component source with composite sync
Which signal can be connected to the input?
(R-Y)Y(B-Y) analog input terminals with sync input or with sync on green (BNC terminals). The projector detects automatically where
the sync signal is located.
Always use an interface (e.g. Barco Magik Interface R9828120) when a computer and local monitor have to be
connected to the projector as the signal cable coming from the computer is limited to 60 cm due to interfer-
ences.
Image 3-10
Component input selection via the RCU
1. Press digit button 5.
Component input selection via the local keypad
1. Press ADJUST key to start up the adjustment mode.
The General Access menu will be displayed. (image 3-11)
2. Use the cursor keys to highlight 5
3. Press ENTER to select the highlighted source.
R5976584 BARCO CINE7 26022003 17