Barco C5011S, Installation Manual

Page: 96 / 158

R5900120 /03 ClickShare CX-50 Gen2 96
5.9 Peripherals
Overview
ClickShare Conference allows you to connect the room speakerphone, microphone, camera and room system
wirelessly to your laptop and use the better equipment of the room in your video conferencing call.
The Peripheral page allows you to enable flexible meeting rooms and gives an overview of the connected
devices and their status.
Overview of the peripherals
1. Log in to the Configurator .
2. Click
Display & Audio
→
Peripherals
.
Image 5–16 Peripherals
Quality score camera
When the camera is in use, a quality score is given between 0 and 100. It gives an indication what’s going on
with the camera stream quality and format change. The quality score reflects the image quality, where zero
means the lowest quality accepted by ClickShare (lowest bandwidth) and 100 means the maximum quality
available by the camera (highest bandwidth). This is unrelated to the format resolution or framerate. The
quality is adjusted to meet the requested framerate, if the framerate cannot be reached, the quality is
lowered. If the lowest quality is reached, there is no other way to meet the framerate. Therefore the quality
score will be equal to zero.
Quality score, normalized value between 0 and 100.:
Image 5–17 Quality score
• Green: >68
• Orange: 35 – 68
• Red: 0 – 34
Source (camera to Base Unit) is requested frame rate. This frame rate results in a destination frame rate
between Base Unit and app or Button.
CX-50 Gen2 Configurator