Barco C5011S, Installation Manual

Page: 85 / 158

85 R5900120 /03 ClickShare CX-50 Gen2
5.3 On-Screen ID information
About device identification
The following items can be set:
• On-Screen language. Independent from the Configurator language.
• Meeting room name
• Location of the meeting room
• Welcome message to be displayed in the meeting room
• Show the network information
- Checked: LAN information such as wired IP address is displayed. Also the Wi-Fi IP address and SSID
are displayed.
- Not checked: no LAN nor Wi-Fi information is displayed (default setup)
• Enable theater mode
- Checked: the entire screen is used to share content. No status bar displayed anymore. The status bar
pops up to show status changes, notifications, pin code etc. and fades out again. With touch screens a
‘tag’ enables you to bring up the status bar to start annotation and blackboarding.
- Not-checked: Status bar remains on the screen.
Image 5–6 On-Screen ID
On Screen language selection
1. Log in to the Configurator.
2. Click
Personalisation
→
On-screen ID
.
3. Select the language of the on-screen text. Click on the drop down box next to Language for on-screen text
and select the desired language.
The following languages are possible:
• Arabic
• Simplified Chinese
• Traditional Chinese
• Danish
• Dutch
• English
• Finnish
• French
• German
• Italian
• Japanese
• Korean
• Norwegian
• Portuguese
CX-50 Gen2 Configurator