Barco C-10, Installation Manual

Page: 101 / 132

101 R5900103 /02 C-10, C-5
6.22 Service, ClickShare API, remote control via
API
About API settings
The API can be enabled or disabled, that means that the access to the unit from an external device can be
allowed or can be blocked.
This functions in enabled by default.
API documentation
The API documentation is included in the Base Unit. Just click on View API documentation to access to the
documentation. Enter your user name and password to access the stored documentation on the Base Unit.
The default user name and password are identical to those of the configurator (admin/admin). This
can be changed in
Security → Passwords .
Image 6 – 32 ClickShare API & documentation
How to enable remote control via API
1. Log in to the Configurator .
2. Click Wi-Fi & Network → Services .
3. Check the check box in front of Remote control via API to enable this function.
This check box is normally checked by default.
Checked: remote control via API is allowed. A password can be used to protect the access.
Not checked: no remote control via API allowed.
About API documentation
The complete API documentation for integration by 3th parties is stored on the Base Unit and protected by
user name and password.
How to display the API documentation
1. Log in to the Configurator .
2. Click on View API documentation .
3. Enter your user name and password and click OK .
The documentation is displayed as a clickable HTML page.
6.23 Services, SNMP
About SNMP
Simple Network Management Protocol (SNMP) is an internet standard protocol for collecting and organizing
information about managed devices on IP networks and for modifying that information to change device
behaviour. In general a SNMP management suite (running on a server) communicates with an SNMP agent
(running on the device). The SNMP agent collects and exposes device information in the form of variables
C-10, C-5 Configurator