![background image](http://html1.mh-extra.com/html/barco/barcoreality-sim6-ultra-r9040150/barcoreality-sim6-ultra-r9040150_user-manual_473908094.webp)
2. RS232 Commands
2.64 Crosshair, Write (Old)
Description
This command will draw a crosshair on the projected image, this crosshair consists of two objects which can be each a square or a
cross. (So 4 combinations are possible)
Availability
Only available on the following software versions:
•
SIM6 WARP6 MKII: V2.20
•
SIM6 ULTRA HB: V1.22
•
SIM6 ULTRA II: V1.00
Command
Command [0]
\xfa
Command [1]
\xda
Data
Data [0]
\x04
Data [1]
x-position msb (position of the crosshair in pixels)
Data [2]
x-position lsb
Data [3]
y-position msb
Data [4]
y-position lsb
Data [5]
size msb (thin ... bold in pixels)
Data [6]
size lsb
Data [7]
width msb (horizontal dimension of the crosshair)
Data [8]
width lsb
Data [9]
height msb (vertical dimension of the crosshair)
Data [10]
height lsb
Data [11]
Type:
•
\x00
= 2 squares
•
\x01
= cross and square
•
\x02
= square and cross
•
\x03
= 2 crosses
Example
This will draw a cursor at position (256, 256) formed by a cross: width=1 pixel, size=10 pixels and a square: size=50 pixels.
Transmit
Start
\xfe
Projector Address
\x01
Command [0]
\xfa
Command [1]
\xda
Data [0]
\x04
Data [1]
\x01
Data [2]
\x00
Data [3]
\x01
90
R5976538 BARCOREALITY SIM6 ULTRA SERIES 08/06/2005