![background image](http://html1.mh-extra.com/html/barco/barcoreality-sim6-ultra-r9040150/barcoreality-sim6-ultra-r9040150_user-manual_473908206.webp)
2. RS232 Commands
2.151 Lamp Runtime, Read
C
AUTION
:
This command is only applicable on the SIM6 Ultra II series projectors.
Description
Read the lamp runtime in hours.
Command
Command [0]
\x64
Return Data
The return data-transfer being the lamp runtime in hours consists of ten data bytes.
Data [0] —[3]: Lamp Runtime in 200W modus (hours) = Data[0] x 256³ + Data[1] x 256² + Data[2] x 256 + Data[3]
Data [8] —[9]: Changed Lamp Modus Counter = Data[8] x 256 + Data[9]
Data [4] —[7]: Lamp Runtime in 250W modus (hours) = Data[4] x 256³ + Data[5] x 256² + Data[6] x 256 + Data[7]
Example
Read the lamp runtime of a projector with address
\x01
. Suppose the lamp runtime in 200W modus is 100 hours, the lamp runtime
in 250W modus is 50 hours, and the lamp modus has been switched 3 times.
Transmit
Start
\xfe
Projector Address
\x01
Command [0]
\x64
Checksum
\x65
Stop
\xff
Receive (Acknowledge)
Start
\xfe
Projector Address
\x01
Command [0]
\x00
Command [1]
\x06
Checksum
\x07
Stop
\xff
202
R5976538 BARCOREALITY SIM6 ULTRA SERIES 08/06/2005