![background image](http://html1.mh-extra.com/html/barco/barcoreality-sim6-ultra-r9040150/barcoreality-sim6-ultra-r9040150_user-manual_473908180.webp)
2. RS232 Commands
2.128 Infrared Ports, Write
Description
Enable/Disable one ore more infrared ports.
Command
Command [0]
\x6e
Data
Data [0] = Status
bit #
bit = 0
bit = 1
bit 0 (LSB)
Disable receiver front
Enable receiver front
bit 1
Disable receiver rear
Enable receiver rear
when no hardwired remote is connected, the receiver front and rear cannot be disabled, so bit 0 and bit 1 will
take effect after a hardwired remote has been connected.
Example
Enable the front and rear receiver of a projector with address
\x01
.
Transmit
Start
\xfe
Projector Address
\x01
Command [0]
\x6e
Data [0]
\x03
Checksum
\x72
Stop
\xff
Receive (Acknowledge)
Start
\xfe
Projector Address
\x01
Command [0]
\x00
Command [1]
\x06
Checksum
\x07
Stop
\xff
176
R5976538 BARCOREALITY SIM6 ULTRA SERIES 08/06/2005