2. RS232 Commands
2.90 File, Rename
Description
Rename File1 to File2.
The file contents is compressed and projector-dependent (It could even be version-dependent).
Only custom files can be renamed.
Only the base name of a file can be renamed. This means that File1 and File2 have to point to the same location (File1 and File2
must have the same "File index").
Command
Command [0]
\xc3
Data
Old filename followed by the new filename (no wildcards allowed).
Example
Rename the file "ntsc .c01" to "camera1 .c01" on a projector with address
\x01
.
Transmit
Start
\xfe
Projector Address
\x01
Command [0]
\xc3
Data [0]
\x6e
(=’n’)
Data [1]
\x74
(=’t’)
Data [2]
\x73
(=’s’)
Data [3]
\x63
(=’c’)
Data [4]
\x20
(=’ ’)
Data [5]
\x20
(=’ ’)
Data [6]
\x20
(=’ ’)
Data [7]
\x20
(=’ ’)
Data [8]
\x2e
(=’.’)
Data [9]
\x63
(=’c’)
Data [10]
\x30
(=’0’)
Data [11]
\x31
(=’1’)
Data [12]
\x00
Data [13]
\x63
(=’c’)
Data [14]
\x61
(=’a’)
Data [15]
\x6d
(=’m’)
Data [15]
\x6d
(=’m’)
Data [16]
\x65
(=’e’)
Data [17]
\x72
(=’r’)
Data [18]
\x61
(=’a’)
Data [19]
\x31
(=’1’)
Data [20]
\x20
(=’ ’)
124
R5976538 BARCOREALITY SIM6 ULTRA SERIES 08/06/2005
