![background image](http://html1.mh-extra.com/html/barco/athena/athena_user-manual_473882047.webp)
5. ICMP
Situation
Solution
One disk failed (red LED) + Error 10580 “
local storage not
available
”.
Note:
The disk status (Error code) can be retrieved via the
(Web) Commander. See user guide of the (Web) Commander.
1.
Switch off the power.
2.
Replace the defect HDD with an original HDD spare part.
See procedure "Removing a HDD from the ICMP", page
47, and "Installing a HDD into the ICMP", page 48. Ensure
to insert the HDD
fi
rmly.
3.
Switch on the power.
Result:
As soon the new HDD is detected by the ICMP the
rebuild of the RAID is started (Blinking red LED).
Multiple disks failed (multiple red LEDs) +
RAID broken
.
Note:
The disk status (RAID broken) can be retrieved via the
(Web) Commander. See user guide of the (Web) Commander.
1.
Switch off the power.
2.
Replace all defect HDDs with original HDD spare parts.
See procedure "Removing a HDD from the ICMP", page
47, and "Installing a HDD into the ICMP", page 48. Ensure
to insert the HDDs
fi
rmly.
3.
Switch on the power.
4.
Start “RAID Initialize”. See user guide of the
Communicator.
Result:
a new empty RAID is created.
All HDD LEDs remain off + Error 10580 “
local storage not
available
”.
Note:
The disk status (Error code) can be retrieved via the
(Web) Commander. See user guide of the (Web) Commander.
1.
Switch off the power.
2.
Reseat all HDDs. See procedure "Removing a HDD from
the ICMP", page 47, and "Installing a HDD into the ICMP",
page 48. Ensure to insert the HDDs
fi
rmly.
3.
If problem remains try “RAID Initialize”. See user guide of
the Communicator. Note that all content will be lost!
4.
If problem remains contact Service for further instructions.
In case the ICMP has to be returned to factory (e.g. for repair) the non defective HDDs should be removed and
kept.
5.10 ICMP device certi
fi
cate
Purpose of the Barco ICMP device certi
fi
cate
The device certi
fi
cate (*.pem) of the Barco ICMP is a digital certi
fi
cate signed by Barco which is required when ordering the KDM to
play a DCP that is ingested on the ICMP. The device certi
fi
cate is stored inside the ICMP and on a web server.
The (WEB) Commander or Communicator can be used to retrieve the device certi
fi
cate directly from the ICMP. To retrieve the device
certi
fi
cate from the website the QR (Quick Response) code can be used. See procedure "Obtaining the Barco ICMP certi
R5906789 ATHENA 16/12/2016
43
Summary of Contents for Athena
