Barco Athena, User Manual, Page: 46 / 74

5. ICMP
1 2
PWR/ERROR READY ICMP Status
Blinking Green Off Boot loader
Blinking Green Blinking Orange Operating System start up
Blinking Green Orange Security Manager - Image Integrity tests
Blinking Green Blinking Yellow Security Manager - Self Test
Blinking Green Yellow Security Manager - FPGA self-test
Green Blinking Green Starting Applications
Green Green Applications started in normal mode
Green Orange Applications started in degraded mode
Blinking Red Off FIPS error
Green Blinking Orange Update ongoing
Orange Orange
Update done
5.9 ICMP HDD status LEDs
ICMP HDD status LEDs
5 4
Image 5-9
Status overview PWR/ERROR and READY LEDs:
4 5
HDD I/O RAID ICMP HDD Status
Off Off HDD idle / Disk in RAID OK.
Blinking Green Off HDD I/O activity / Disk in RAID OK.
Blinking Green Blinking Red HDD I/O activity / RAID rebuilding.
Off Red HDD idle / Disk error. See troubleshooting table below for curative actions.
Troubleshooting
Situation Solution
One disk failed (red LED) + RAID degraded .
The ongoing event is not interrupted.
Note: The disk status (RAID degraded) can be retrieved via the
(Web) Commander. See user guide of the (Web) Commander.
1. Switch off the power.
2. Replace the defect HDD with an original HDD spare part.
See procedure "Removing a HDD from the ICMP", page
47, and "Installing a HDD into the ICMP", page 48. Ensure
to insert the HDD
fi rmly.
3. Switch on the power.
Result: As soon the new HDD is detected by the ICMP the
rebuild of the RAID is started (Blinking red LED).
42 R5906789 ATHENA 16/12/2016