Barco Athena, User Manual

Page: 39 / 74

5. ICMP
USB
Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that de fi nes the cables, connectors and
communications protocols used in a bus for connection, communication, and power supply between computers and
electronic devices.
USB 2.0 (also called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective
throughput up to 35 MB/s or 280 Mbit/s), in addition to the "USB 1.x Full Speed" signaling rate of 12 Mbit/s.[16] USB 2.0
connectors are usually colored black.
USB 3.0 de fi nes a new SuperSpeed mode with a signaling speed of 5 Gbit/s and
a usable data rate of up to 4 Gbit/s (500 MB/s). A USB 3.0 port is usually colored blue, and is backwards compatible
with USB 2.0.
5.4 ICMP source input ports
Location of the source input ports
8 9 10
Image 5-7
Functionality
8
DisplayPort A (B)
DisplayPort connector to connect a video source.
9
3G-SDI A (B)
SDI connector to connect a video source.
10
HDMI
HDMI connector to connect a video source.
5.5 ICMP DisplayPort speci fi cations
DisplayPort
Digital display interface developed by the Video Electronics Standards Association (VESA). This royalty-free interface
is primarily used to connect a video source to a display device such as a computer monitor, though it can also be used
to transmit audio, USB, and other forms of data. VESA designed it to replace VGA, DVI, and FPD-Link. Backward
compatibility to VGA and DVI by using active adapter dongles enables users to use DisplayPort
fi tted video sources
without replacing existing display devices.
R5906789 ATHENA 16/12/2016 35