Barco Athena Installation Manual Download Page 117

Page: 117 / 184

R5906790 /04

Athena

117

Slightly turn the green colored control knob number 6 until the green pattern in the

upper right

of the

projected image converges with the red pattern.

Image 12-10

Repeat step 2 and 3 until

coincidence

is obtained of the green pattern in the

lower left

and

upper right

the projected image.

Repeat from step 1 until

full coincidence

is obtained of the green pattern in the

center

lower left

and

upper

right

of the projected image.

Switch off the projector.

Continue with the procedure

Closing off the Light Processor compartment

12.5 Closing off the Light Processor compartment

Required tools

•

7mm flat screwdriver.

•

3mm Allen wrench.

How to close off the Light Processor compartment?

Place the fan on top of the Light Processor in the lower position. Ensure that the four mounting pins (1) of the
fan assembly are engaged.

Caution:

Take care of the wire.

Convergence

Summary of Contents for Athena

























































































































































































Search results

Summary of Contents for Athena

Reviews:

Related manuals for Athena

Brands by name

Popular brands

Barco Athena, Installation Manual

Search results

Summary of Contents for Athena

Reviews:

Related manuals for Athena

Brands by name

Popular brands