4. Operating
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 06 – February-2005
_____________________________________________________________________
4-9
4.5
Window manager
The window manager, which is pre-configured on A
RGUS
offers a convenient and fast way to choose certain
commands. By clicking on the root window background depending on left click or right click a menu opens.
Figure 4-1
Left click and right click on the root window background
Work menu
Xterm
Start X terminal window
Xvideo
Start Xvideo client for displaying video and RGB
Rctrl
Start R
EMOTE
-C
ONTROL
client
Xgenlock
Select QAVC (Quad Analog
Video Card)
Select the first channel of the first Q
UAD
A
NALOG
V
IDEO
C
ARD
for genlocking
Select SVC (Streaming
Video Card)
Select the first channel of the first S
TREAMING
V
IDEO
C
ARD
for genlocking
Select Intern
Select the first UGX or AGX
G
RAPHIC
C
ARD
for genlocking
Select Extern
Select the external genlock signal for genlocking
OFF
Switch genlocking off
ON
Switch genlocking on
Read Config File
Read and apply the last saved genlock settings
Save Config File
Save the current genlock settings and apply them automatically after
system restart
When using genlock make sure, that the cabling for genlock has been established as
explained in section
.
If an external signal is connected only external may be selected. If selecting internal or a
video signal it will be disturbed by the external signal. Therefore the external signal should
be unplugged before switching to an other type of genlock!
Configuration
Screensaver
Default
Set screensaver to default settings
Immediately
Set screensaver to immediate screensaving
Blank
Set screensaver to blank display
Pattern after 5 min off
Set screensaver to switch off pattern after 5 minutes
Off
Switch screensaver off
Mouse
Fast
Set speed of mouse to fast
Normal
Set speed of mouse to normal
Slow
Set speed of mouse to slow
Left handed mouse
Configure mouse for left handed operation
