Barco 7QP, User Manual

Page: 26 / 286

4. Installation
4.4 RCU battery installation
Where to fi nd the batteries for the remote control ?
The batteries are not placed in the remote control unit to avoid control operation in its package, resulting in a shorter battery life
time. At delivery the batteries can be found in a separated bag attached to the remote control unit. Before using your remote control,
install the batteries
fi rst.
How to install the batteries in the remote control ?
1. Push the battery cover tab with the fi ngernail a little backwards (1) and pull, at the same time, the cover upwards (2).
1
2
Image 4-8
2. Insert the two AA size batteries, making sure the polarities match the + and - marks inside the battery compartment.
+
+
-
-
Image 4-9
3. Insert (1) the lower tab of the battery cover in the gap at the bottom of the remote control, and press (2) the cover until it clicks
in place.
+
+
-
-
1
2
Image 4-10
C
AUTION
:
Replace with the correct battery type. Use two AA size batteries. There is a risk of explosion if the
battery is replaced with an incorrect type.
C
AUTION
:
Replace the battery as explained above. There is a risk of explosion if the battery is incorrectly
installed.
22 R59770330 SIM 7QP SERIES 07/10/2013