barbas Wi-Fi Box / Puck, Installation And User Manual

Page: 8 / 40

4 Requirements
4.1 Wi-Fi router (for Wi-Fi Box only)
Minimum requirements Wi-Fi router:
• Compatible with IEEE 802.11n/g/b
• WPA2 encryption
• Radio frequency: 2.4 GHz
• Wireless auto channel: Automated search for Wi-Fi radio channel free of interference
• Support of the User Datagram Protocol (UDP)
• Connection to mDNS is required to make sure Easy Commission Process works.
If the Wi-Fi router is part of a business network, or if the router is applicable for use in a
business network, the User Datagram Protocol (UDP) and/or broadcasting must be
enabled. Refer to the manual of the router.
Note:
At the end of the installation procedure, the initial router settings can be
restored, if necessary.
4.2 Receiver
• Symax-2 receiver. This type can be recognized by a blue sticker attached to it.
Contact your dealer if you have a receiver with a green sticker (Symax-1) or a silver
sticker (GV60).
• The Symax-2 receiver must have a power supply by means of a 6 VDC adapter.
Batteries are not sufficient to power the Wi-Fi Box.
Note: The Puck works only with a Symax-2 receiver with production code 'CN'
or higher. This code can be found in the lower right corner of the blue sticker
on the receiver.
4.3 Handset (for Wi-Fi Box only)
The Wi-Fi Box works only with the 8-button or 10-button Symax-2 handset with a blue
sticker attached to it.
Contact your dealer if you have a handset with a green sticker (Symax-1) or with a silver
sticker (GV60).
4.4 Mobile device (for Wi-Fi Box only)
• Tablet or smartphone with IOS 8.0 / Android 4.2 or higher.
Requirements
8