8.8.2
Convection air via the top outlet openings
To close the convection air openings at the front of the appliance, refer to section
1.
On the appliance, remove the two
break out plates in the convection air
outlet openings with a hammer.
2.
Put the collar adaptors in the open
outlet openings (1).
3.
Bend out the 3 lips on each collar
adaptor, and turn the collar adaptor
until it locks.
4.
Connect the flexible aluminum pipes
(C) on the collar adaptors. Use a
hose clamp (B).
5.
Connect the flexible aluminum pipes to fitting boxes in the chimney breast.
8.9
Insulate the appliance
Caution:
• Use white unbound ceramic insulation wool. Do not use glass wool or rock
wool, these materials can cause a bad smell, unwanted smoke and is not
applicable for high temperatures. Refer to section
for the
specifications.
A
2
2
1
B
C
Installation in a new fireplace
38
Cuatro-7 75-60
Summary of Contents for Cuatro-7 75-60
