6. Make sure the upper baffle (2) is still
in the correct position.
7. If the upper baffle is not in the correct
position, remove the lower baffle (1)
and put the upper baffle in the correct
position and install the lower baffle
again.
9.5.8
Install the heat shield
Only do this procedure after finish of the procedure in section
.
1. Move the heat shield up and put the
rear side above the upper baffle (1).
2. Move the front of the heat shield up
(2) and put the edge on the metal
strip under the air wash inlet (3).
1
2
1
3
2
Maintenance
36
BOX 30 75
Summary of Contents for BOX30 75
Page 45: ...Warranty Terms BOX 30 75 45...
Page 46: ...Warranty Terms 46 BOX 30 75...
Page 47: ...Warranty Terms BOX 30 75 47...
