10. Put ceramic logs no. 36, 44, 46 and 47 on the fire glass as shown on the picture.
Figure 38.
11. Install the glass panes. Refer to chapter
for the correct procedure.
5.3.4
Do a final check on the fireplace
Safety conditions
Caution:
Wait 4 weeks after the installation before you use the fireplace. The cement
needs to harden. A final check on the fireplace can be done directly after the
installation.
Procedure
1.
Start the appliance and do a check on the ignition of the pilot light and main burner.
The ignition must be quiet and must produce a calm flame. To start the appliance,
refer to the user manual.
2.
Do a check on the main burner. The flames increase in height and change from blue/
yellow to yellow.
3.
If all flames are yellow, the appliance is ready for use.
Installation
50
Gas Fire Front 90-60
Summary of Contents for 90-60 PF2
